LGRepair Miami

Guides

Troubleshooting — LG appliances

Step-by-step checks the owner can run before booking a visit.

Guides on Troubleshooting

  • Two fingers holding down two buttons at once on the flat control panel inside the top of a refrigerator's fresh food compartment.
    Troubleshooting

    Er, F or r: The Letter in Front of an LG Refrigerator Code

    The characters name the part. The letter in front of them names which cooling system is reporting it — and everybody drops it when they write the code down.

    Read the guide
  • The back of a hand laid flat against the glass of a closed oven door to test the temperature, the oven dark and unlit, a kitchen towel over the handle.
    Troubleshooting

    The Oven Door Is Still Locked After Self Clean. What Now?

    Time first, because the lock is not allowed to release while the cavity is hot — and on a well-insulated wall oven that is hours rather than minutes.

    Read the guide
  • A finger pointing at one small indicator lamp in a row on a laundry machine's control panel in a dark room, that lamp lit and the rest dark, a notebook and pen on the machine's top.
    Troubleshooting

    Reading an LG Washer or Dryer by Its Blinking Lights

    Some of these machines have no numbers to show you. They report by which lights blink, the maker publishes what the patterns mean, and there is nothing to type into a search box.

    Read the guide
  • A dial oven thermometer standing alone in the middle of an otherwise empty oven rack, the door closed and the thermometer seen through the glass with the cavity light on.
    Troubleshooting

    Your Oven Says 350 and It Is Not 350: Calibrating an LG

    A steady error is an offset you can set yourself in five minutes. A swing is a sensor and needs a visit. Half an hour with a thermometer tells you which.

    Read the guide
  • Three damp towels being dropped one at a time into an otherwise empty dryer drum through the open door, water still dark in the fabric.
    Troubleshooting

    Why the Dryer Says an Hour and Then Suddenly Says One Minute

    The number was never a countdown. On a sensor cycle it is an estimate, and two metal strips inside the drum are what it is estimating from.

    Read the guide

Tell us the model number and what it is doing.

This article is based on:

  • Official manufacturer documentation
  • Internal repair procedures
  • Technician repair history
  • Company quality standards
Call (305) 419-0291