Error code
Refrigerator error code It
LG refrigerator error code It: This is the mechanism rather than the cold: the motor that rotates the tray or drives the ejector arm to push finished cubes into the bucket. Every spelling LG publishes for it, which machines can raise it, and what to do next.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code It, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
It
This is the mechanism rather than the cold: the motor that rotates the tray or drives the ejector arm to push finished cubes into the bucket. When it fails the tray fills, the cubes freeze, and nothing arrives — and because the tray is full the machine will not fill again either, so the whole thing stops with a full tray and an empty bucket. That combination is worth recognizing, because it separates a motor problem from a water problem in one look.
or call (305) 419-0291
What it narrows down to
The ice maker's own motor is not turning the harvest
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the refrigerators
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
The fan over the condenser has stopped turning, and the machine has noticed
The fan that moves cold around the freezer is not turning
The fan feeding the fresh food side has stopped
The sensor reporting the freezer temperature is not making sense
The fresh food compartment's own sensor is not reporting properly
The sensor that decides when to melt the ice off the coil has failed
The machine cannot read the temperature of the room it is standing in
The fan that carries cold to the ice maker has stopped
The ice maker cannot tell whether the cubes are frozen yet
The internal water tank is missing or not seated
The main board and the display have stopped talking to each other
The refrigerator has found something wrong inside itself and wants a technician
The same digits mean different things on different equipment. Search the full code list
In more detail
About Refrigerator error code It
What It means on this make
This is the mechanism rather than the cold: the motor that rotates the tray or drives the ejector arm to push finished cubes into the bucket. When it fails the tray fills, the cubes freeze, and nothing arrives — and because the tray is full the machine will not fill again either, so the whole thing stops with a full tray and an empty bucket. That combination is worth recognizing, because it separates a motor problem from a water problem in one look.
The other ways LG prints this one
It · Er It
LG publishes a condition and then every string that can stand for it, and which one your machine shows depends on the panel it was built with — OE, E03 and E21 are one condition on a washer, and Er dS, F dS and r dS are one sensor on different evaporators. They are one page here, so whichever of them you searched for, this is the right page.
Where this appears, and why not to clear it
On the appliance's own display. LG reports errors two ways: machines with a digital display show a code, and the laundry machines without one blink their indicator lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power. On a refrigerator you can also force the last code back onto the display by holding Freezer Temperature and Express Frz together for three seconds — LG documents that, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.
What to do about it
- Take the bucket out and look at the tray. Full of ice with an empty bucket is this code's signature.
- Check nothing has jammed the ejector arm — a cube that welded itself to the housing will do it.
- Cycle the power for five minutes.
- If the tray is still full a day later, the module is the repair. It comes out as an assembly.
Where this goes next
The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 419-0291 and describe what the panel is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards