Error code
Range error code PF
LG range error code PF: The same code the laundry uses, for the same reason. Every spelling LG publishes for it, which machines can raise it, and what to do next.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code PF, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
PF
The same code the laundry uses, for the same reason. A storm, a brownout or a tripped breaker leaves the oven in a state it did not choose, and rather than pick up where it was — with a self clean half done and a locked door, say — it stops and tells you. Restarting is nearly always the whole answer. A PF that appears without any power event is worth investigating, because on a 240-volt appliance it can mean one leg of the supply.
or call (305) 419-0291
What it narrows down to
The supply to the appliance was cut while it was working
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the ranges
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
The sensor measuring the main oven cavity has gone out of range
The same sensor problem, in the lower cavity
The cavity is not reaching or holding the temperature it was set to
The motorized lock has not reported that it did what it was told
The control and the display are not talking
The oven has rejected its temperature sensor's reading
The fan that moves air around the cavity is not turning
The temperature probe socket is reporting a problem
The steam system's own sensing has failed
The fan that keeps the surrounding cabinet cool has stopped while the oven was at its hottest
The touch controls are reporting a key that is stuck or wet
An induction zone cannot measure its own temperature
The same digits mean different things on different equipment. Search the full code list
In more detail
About Range error code PF
What PF means on this make
The same code the laundry uses, for the same reason. A storm, a brownout or a tripped breaker leaves the oven in a state it did not choose, and rather than pick up where it was — with a self clean half done and a locked door, say — it stops and tells you. Restarting is nearly always the whole answer. A PF that appears without any power event is worth investigating, because on a 240-volt appliance it can mean one leg of the supply.
Where this appears, and why not to clear it
On the appliance's own display. LG reports errors two ways: machines with a digital display show a code, and the laundry machines without one blink their indicator lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power. On a refrigerator you can also force the last code back onto the display by holding Freezer Temperature and Express Frz together for three seconds — LG documents that, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.
What to do about it
- Press CLEAR/OFF and start the function again.
- Check the breaker for the appliance has not tripped, and reset it fully off then on.
- Note whether anything else in the kitchen lost power at the same time.
- If PF returns with no outage, book it — a supply problem on a range is worth finding early.
Where this goes next
The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 419-0291 and describe what the panel is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards