Error code
Range error code F6
LG range error code F6: Where the thermistor codes say the oven cannot measure, these say it cannot heat: the element or, on gas, the ignition and valve. Every spelling LG publishes for it, which machines can raise it, and what to do next.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code F6, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
F6
Where the thermistor codes say the oven cannot measure, these say it cannot heat: the element or, on gas, the ignition and valve. F6 and F9 are the upper cavity, F19 is an oven heating error outright. On an electric oven a bake element that has failed is often visible — a blistered or broken loop at the bottom of the cavity — and on gas the give-away is an igniter that glows and never brings the flame on, which is a weak igniter rather than a gas problem.
or call (305) 419-0291
What it narrows down to
The cavity is not reaching or holding the temperature it was set to
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the ranges
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
The sensor measuring the main oven cavity has gone out of range
The same sensor problem, in the lower cavity
The motorized lock has not reported that it did what it was told
The control and the display are not talking
The oven has rejected its temperature sensor's reading
The fan that moves air around the cavity is not turning
The temperature probe socket is reporting a problem
The steam system's own sensing has failed
The fan that keeps the surrounding cabinet cool has stopped while the oven was at its hottest
The touch controls are reporting a key that is stuck or wet
An induction zone cannot measure its own temperature
Not an error — the glass is above 150°F and the cooktop is saying so
The same digits mean different things on different equipment. Search the full code list
In more detail
About Range error code F6
What F6 means on this make
Where the thermistor codes say the oven cannot measure, these say it cannot heat: the element or, on gas, the ignition and valve. F6 and F9 are the upper cavity, F19 is an oven heating error outright. On an electric oven a bake element that has failed is often visible — a blistered or broken loop at the bottom of the cavity — and on gas the give-away is an igniter that glows and never brings the flame on, which is a weak igniter rather than a gas problem.
The other ways LG prints this one
F6 · F9 · F19
LG publishes a condition and then every string that can stand for it, and which one your machine shows depends on the panel it was built with — OE, E03 and E21 are one condition on a washer, and Er dS, F dS and r dS are one sensor on different evaporators. They are one page here, so whichever of them you searched for, this is the right page.
Where this appears, and why not to clear it
On the appliance's own display. LG reports errors two ways: machines with a digital display show a code, and the laundry machines without one blink their indicator lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power. On a refrigerator you can also force the last code back onto the display by holding Freezer Temperature and Express Frz together for three seconds — LG documents that, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.
What to do about it
- Look at the bake element with the oven cold. A visible break or blister is the answer.
- On gas, watch the igniter through the bottom vent — it should glow bright and light within a minute.
- Press CLEAR/OFF, then cut the breaker for thirty seconds.
- Book it. Elements and igniters are parts, and both are ordinary repairs.
Where this goes next
The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 419-0291 and describe what the panel is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards