Error code
Washer error code PF
LG washer error code PF: Not a machine problem at all, and in this city it is a summer problem: a brownout during a storm, a breaker that tripped, or somebody unplugging the machine to use the socket. Every spelling LG publishes for it, which machines can raise it, and what to do next.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code PF, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
PF
Not a machine problem at all, and in this city it is a summer problem: a brownout during a storm, a breaker that tripped, or somebody unplugging the machine to use the socket. The washer remembers that it was mid-cycle and tells you rather than quietly starting again with a drum full of water. Restarting the cycle is the whole answer nearly every time. A PF that appears every wash without any power event is a different thing — that is the supply or the board, and it is worth investigating.
or call (305) 419-0291
What it narrows down to
The cycle was interrupted by the power going away
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the washers
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
The machine has finished washing and cannot get rid of the water
The machine is not filling, or is filling too slowly to finish in time
The drum cannot spin the load safely because it is on one side
The machine cannot prove the door is shut, so it will not start or will not open
The motor is overloaded or cannot turn
The machine cannot measure how much water is in the drum
The machine cannot read the water temperature
The machine has found more suds than it can spin through, and is adding a rinse
The machine believes water in it has frozen
Not an error — the machine has counted enough loads to want cleaning
Not an error — the panel is locked
The clutch that couples the motor to the drum is not engaging
The same digits mean different things on different equipment. Search the full code list
In more detail
About Washer error code PF
What PF means on this make
Not a machine problem at all, and in this city it is a summer problem: a brownout during a storm, a breaker that tripped, or somebody unplugging the machine to use the socket. The washer remembers that it was mid-cycle and tells you rather than quietly starting again with a drum full of water. Restarting the cycle is the whole answer nearly every time. A PF that appears every wash without any power event is a different thing — that is the supply or the board, and it is worth investigating.
The other ways LG prints this one
PF · E13
LG publishes a condition and then every string that can stand for it, and which one your machine shows depends on the panel it was built with — OE, E03 and E21 are one condition on a washer, and Er dS, F dS and r dS are one sensor on different evaporators. They are one page here, so whichever of them you searched for, this is the right page.
Where this appears, and why not to clear it
On the appliance's own display. LG reports errors two ways: machines with a digital display show a code, and the laundry machines without one blink their indicator lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power. On a refrigerator you can also force the last code back onto the display by holding Freezer Temperature and Express Frz together for three seconds — LG documents that, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.
What to do about it
- Restart the cycle. That is usually all this needs.
- Check the breaker for the laundry circuit has not tripped.
- If the machine is on an extension lead or a power strip, put it straight into the wall.
- If PF appears on every cycle with no outage, book it.
Where this goes next
The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 419-0291 and describe what the panel is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards