Error code
Dryer: Blinking LEDs on a dryer with no display
LG dryer — reported by blinking lights rather than by a code. As with the washers, some LG dryers have no numeric display and report by blinking their indicator lights instead, and LG publishes the mapping.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Signal dryer-led, from the manufacturer's own documentation
This code has no number, because this equipment has no display to put one on. The appliance signals it instead — an alarm, a symbol or a pattern of lights — and what it means is recorded in the documentation that ships with it.
The signal
dryer-led
As with the washers, some LG dryers have no numeric display and report by blinking their indicator lights instead, and LG publishes the mapping. The combinations mean specific things — the same conditions the numbered machines show as codes — and they are documented, which under the owner's instruction of 2026-08-27 makes them codes rather than curiosities. Nothing about the diagnosis changes; only the way the machine tells you does.
or call (305) 419-0291
What it narrows down to
The dryer reports by which indicator lights blink rather than by a number
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the dryers
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
The cycle was interrupted by the power going away
Not an error — the panel is locked
The machine has no numbers to show you, so it reports by which lights blink
The sensor that measures the dryer's heat is out of range
The machine is tumbling but no power is reaching the heat
The machine cannot confirm the door is closed
The drum is not turning when the machine asks it to
The machine is measuring how blocked its own exhaust is, and reporting a percentage
A ventless dryer cannot get rid of the water it has taken out of the load
The sensor that decides when the load is dry is not reporting
A machine with a steam cycle cannot get the water it needs
The same digits mean different things on different equipment. Search the full code list
In more detail
About Dryer: Blinking LEDs on a dryer with no display
What the appliance is actually reporting
As with the washers, some LG dryers have no numeric display and report by blinking their indicator lights instead, and LG publishes the mapping. The combinations mean specific things — the same conditions the numbered machines show as codes — and they are documented, which under the owner's instruction of 2026-08-27 makes them codes rather than curiosities. Nothing about the diagnosis changes; only the way the machine tells you does.
The other light combinations that mean this
dryer-led · blinking LED · flashing lights
LG publishes what the indicator lights mean on the washers and dryers that have no numeric display. They are grouped here by what they mean rather than split into near-identical pages, and every pattern the maker names is printed above.
Where this appears, and why not to clear it
On the indicator lights, on a laundry machine with no numeric display. LG publishes what the patterns mean, and on those models the pattern is the entire diagnosis — it disappears the moment the power is cut. Write it down or photograph the panel before switching anything off, and count a full sequence rather than a single flash: the lights also blink to show cycle status, so treat it as an error only if the machine is misbehaving as well.
What to do about it
- Watch a full sequence and count the lit lights before doing anything.
- Photograph the panel while it blinks.
- Clean the lint screen and check the duct first regardless — most dryer conditions start there.
- Quote the pattern when you call. It is what a technician works from.
Where this goes next
The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 419-0291 and describe what the panel is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards