Repair cost
LG gas dryer igniter replacement cost
What gas dryer igniter replacement costs on an LG in South Florida, from $185, and what moves that number. No final price is published anywhere on this site: the figure is confirmed on site after the diagnostic and agreed in writing before anything is opened.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
The short version
Where this figure comes from
A starting point for built-in appliances in South Florida, published so the number is not a mystery until somebody is standing in your kitchen.
Starts at
from $185
After a diagnostic from $95, which comes off the bill when you go ahead with the work.
or call (305) 419-0291
It is not
A quote for your unit
Exact cost
Confirmed after the on-site diagnostic
Warranty
On the labor we performed
What moves it
Why two of the same job cost different amounts
These apply at the same time and in both directions. Which of them is true of your kitchen is what the on-site diagnostic settles.
-
Igniter or flame sensor
Two parts, one symptom, very different figures.
-
Whether the valve coils are involved
Less common, and measured.
-
Leak testing
Every joint disturbed is tested and the result written down.
The work itself
What we actually do
The job behind the figure: what it involves, when a symptom points at it, and what we check first.
-
from $185 Gas dryer igniter replacement
On a gas dryer the igniter is the part that fails, far more often than the valve. It weakens over years until it no longer draws enough current to open the gas valve — and it will still glow while doing that, which is why 'it glows so it must be fine' is the most common wrong conclusion in this repair.
- An igniter that glows can still be too weak to open the valve
- It is measured, not judged by eye
- The gas connection is leak-tested afterwards and the result written down
In more detail
About LG gas dryer igniter replacement cost
Why this figure is a from
The igniter is the part that ages on a gas dryer, and it is measured rather than judged by eye — one that glows can still be too weak to open the valve. The flame sensor produces a nearly identical symptom for a fraction of the cost and is checked first.
What puts your job at the bottom or the top of it
At the bottom: one appliance, a code or a light pattern already written down, easy access, and a cause that turns out to be a setting, a filter or something cleared rather than replaced. At the top: a machine built into joinery, a part that has to be ordered rather than picked up, and a second problem found alongside the first. We say which of those you are in before the work starts, not after.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards
Before you book
Questions about LG gas dryer igniter replacement cost
Why is it a from and not a price?
Because the same job is not the same work on two machines. The part, the access and what the appliance turns out to have done to itself all move it, and quoting a number before measuring is guessing with extra confidence. The figure is confirmed on site and agreed in writing before anything is opened — BRAND-RULES is explicit about it and so are we.
Is the diagnostic charged on top?
It pays for the diagnosis, which is real work. If you go ahead with the repair it comes off the bill, so you pay it once either way.
Where we do it
Across Miami-Dade, Broward, and Palm Beach
Same terms everywhere we go: an on-site diagnostic first, the price agreed in writing, and the exact figure confirmed once we have seen the unit.
Neighborhoods people ask for by name