---
title: "Washer error code EE"
description: "LG washer error code EE: This is the one code on the list that names the brain rather than a limb."
url: "https://lgmiami.support/error-codes/washer-main-control/"
date_modified: "2026-09-05"
Appliance type: "Washers"
---


# Washer error code EE

### What EE means on this make

This is the one code on the list that names the brain rather than a limb. It is uncommon, and when it is genuine it is a board replacement. What makes it worth a careful look first is that supply problems imitate it: a shared circuit with something heavy on it, a long extension lead, or a socket with a poor neutral will all produce board errors on a machine that is perfectly healthy.

### The other ways LG prints this one

EE · ee

LG publishes a condition and then every string that can stand for it, and which one your machine shows depends on the panel it was built with — OE, E03 and E21 are one condition on a washer, and Er dS, F dS and r dS are one sensor on different evaporators. They are one page here, so whichever of them you searched for, this is the right page.

### Where this appears, and why not to clear it

On the appliance’s own display. LG reports errors two ways: machines with a digital display show a code, and the laundry machines without one blink their indicator lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power. On a refrigerator you can also force the last code back onto the display by holding Freezer Temperature and Express Frz together for three seconds — LG documents that, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.

### What to do about it

- Plug the machine straight into a wall socket, not a strip or an extension.
- Cut the power at the breaker for five minutes.
- Note whether anything else on the same circuit misbehaves.
- If it returns on a clean supply, book it.

### Where this goes next

The job this usually becomes is [diagnostic visit](/services/diagnostic-visit/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 419-0291](tel:+13054190291) and describe what the panel is doing before booking anything.

Main control board

What this one means

What EE means on this make

This is the one code on the list that names the brain rather than a limb. It is uncommon, and when it is genuine it is a board replacement. What makes it worth a careful look first is that supply problems imitate it: a shared circuit with something heavy on it, a long extension lead, or a socket with a poor neutral will all produce board errors on a machine that is perfectly healthy.

The other ways LG prints this one

EE · ee

LG publishes a condition and then every string that can stand for it, and which one your machine shows depends on the panel it was built with — OE, E03 and E21 are one condition on a washer, and Er dS, F dS and r dS are one sensor on different evaporators. They are one page here, so whichever of them you searched for, this is the right page.

Where this appears, and why not to clear it

On the appliance’s own display. LG reports errors two ways: machines with a digital display show a code, and the laundry machines without one blink their indicator lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power. On a refrigerator you can also force the last code back onto the display by holding Freezer Temperature and Express Frz together for three seconds — LG documents that, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.

What to do about it

Plug the machine straight into a wall socket, not a strip or an extension.

Cut the power at the breaker for five minutes.

Note whether anything else on the same circuit misbehaves.

If it returns on a clean supply, book it.

Where this goes next

The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 419-0291](tel:+13054190291) and describe what the panel is doing before booking anything.

---

**[Read full article: Washer error code EE](https://lgmiami.support/error-codes/washer-main-control/)**