---
title: "Washer: Blinking cycle lights on a machine with no display"
description: "Washer blinking cycle lights on a machine with no display — washer: Blinking cycle lights on a machine with no display: lG washer — reported by blinking li"
url: "https://lgmiami.support/error-codes/washer-blinking-lights/"
date_modified: "2026-09-05"
Appliance type: "Dryers, Washers"
---


# Washer: Blinking cycle lights on a machine with no display

### What the appliance is actually reporting

Not every LG laundry machine has a digital display. On those, the cycle indicator lights carry the report instead, and LG publishes what the combinations mean for both washers and dryers. That makes them codes in every way that matters — documented by the manufacturer, specific, and worth writing down — and this site treats them as codes because the owner’s instruction of 2026-08-27 says signals are codes where they are documented. The practical difficulty is that there is nothing to type into a search box, which is exactly why the pattern needs describing on the phone.

### The other light combinations that mean this

blinking · LED · flashing lights · blinking lights

LG publishes what the indicator lights mean on the washers and dryers that have no numeric display. They are grouped here by what they mean rather than split into near-identical pages, and every pattern the maker names is printed above.

### Where this appears, and why not to clear it

On the indicator lights, on a laundry machine with no numeric display. LG publishes what the patterns mean, and on those models the pattern is the entire diagnosis — it disappears the moment the power is cut. Write it down or photograph the panel before switching anything off, and count a full sequence rather than a single flash: the lights also blink to show cycle status, so treat it as an error only if the machine is misbehaving as well.

### What to do about it

- Watch a full blink sequence before touching anything, and count which lights are lit.
- Photograph the panel mid-blink. It is much easier than describing it later.
- Note whether the pattern repeats identically or changes.
- Cut the power for five minutes; a pattern that does not come back was an event rather than a failure.

### Where this goes next

The job this usually becomes is [diagnostic visit](/services/diagnostic-visit/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 419-0291](tel:+13054190291) and describe what the panel is doing before booking anything.

Blinking cycle lights on a machine with no display

What the lights are telling you

What the appliance is actually reporting

Not every LG laundry machine has a digital display. On those, the cycle indicator lights carry the report instead, and LG publishes what the combinations mean for both washers and dryers. That makes them codes in every way that matters — documented by the manufacturer, specific, and worth writing down — and this site treats them as codes because the owner’s instruction of 2026-08-27 says signals are codes where they are documented. The practical difficulty is that there is nothing to type into a search box, which is exactly why the pattern needs describing on the phone.

The other light combinations that mean this

blinking · LED · flashing lights · blinking lights

LG publishes what the indicator lights mean on the washers and dryers that have no numeric display. They are grouped here by what they mean rather than split into near-identical pages, and every pattern the maker names is printed above.

Where this appears, and why not to clear it

On the indicator lights, on a laundry machine with no numeric display. LG publishes what the patterns mean, and on those models the pattern is the entire diagnosis — it disappears the moment the power is cut. Write it down or photograph the panel before switching anything off, and count a full sequence rather than a single flash: the lights also blink to show cycle status, so treat it as an error only if the machine is misbehaving as well.

What to do about it

Watch a full blink sequence before touching anything, and count which lights are lit.

Photograph the panel mid-blink. It is much easier than describing it later.

Note whether the pattern repeats identically or changes.

Cut the power for five minutes; a pattern that does not come back was an event rather than a failure.

Where this goes next

The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 419-0291](tel:+13054190291) and describe what the panel is doing before booking anything.

---

**[Read full article: Washer: Blinking cycle lights on a machine with no display](https://lgmiami.support/error-codes/washer-blinking-lights/)**