---
title: "Refrigerator error code It"
description: "LG refrigerator error code It: This is the mechanism rather than the cold: the motor that rotates the tray or drives the ejector arm to push finished cubes…"
url: "https://lgmiami.support/error-codes/refrigerator-ice-maker-motor/"
date_modified: "2026-09-05"
Appliance type: "Ice makers, Refrigerators"
---


# Refrigerator error code It

### What It means on this make

This is the mechanism rather than the cold: the motor that rotates the tray or drives the ejector arm to push finished cubes into the bucket. When it fails the tray fills, the cubes freeze, and nothing arrives — and because the tray is full the machine will not fill again either, so the whole thing stops with a full tray and an empty bucket. That combination is worth recognizing, because it separates a motor problem from a water problem in one look.

### The other ways LG prints this one

It · Er It

LG publishes a condition and then every string that can stand for it, and which one your machine shows depends on the panel it was built with — OE, E03 and E21 are one condition on a washer, and Er dS, F dS and r dS are one sensor on different evaporators. They are one page here, so whichever of them you searched for, this is the right page.

### Where this appears, and why not to clear it

On the appliance’s own display. LG reports errors two ways: machines with a digital display show a code, and the laundry machines without one blink their indicator lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power. On a refrigerator you can also force the last code back onto the display by holding Freezer Temperature and Express Frz together for three seconds — LG documents that, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.

### What to do about it

- Take the bucket out and look at the tray. Full of ice with an empty bucket is this code’s signature.
- Check nothing has jammed the ejector arm — a cube that welded itself to the housing will do it.
- Cycle the power for five minutes.
- If the tray is still full a day later, the module is the repair. It comes out as an assembly.

### Where this goes next

The job this usually becomes is [diagnostic visit](/services/diagnostic-visit/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 419-0291](tel:+13054190291) and describe what the panel is doing before booking anything.

Ice maker motor

What this one means

What It means on this make

This is the mechanism rather than the cold: the motor that rotates the tray or drives the ejector arm to push finished cubes into the bucket. When it fails the tray fills, the cubes freeze, and nothing arrives — and because the tray is full the machine will not fill again either, so the whole thing stops with a full tray and an empty bucket. That combination is worth recognizing, because it separates a motor problem from a water problem in one look.

The other ways LG prints this one

It · Er It

LG publishes a condition and then every string that can stand for it, and which one your machine shows depends on the panel it was built with — OE, E03 and E21 are one condition on a washer, and Er dS, F dS and r dS are one sensor on different evaporators. They are one page here, so whichever of them you searched for, this is the right page.

Where this appears, and why not to clear it

On the appliance’s own display. LG reports errors two ways: machines with a digital display show a code, and the laundry machines without one blink their indicator lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power. On a refrigerator you can also force the last code back onto the display by holding Freezer Temperature and Express Frz together for three seconds — LG documents that, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.

What to do about it

Take the bucket out and look at the tray. Full of ice with an empty bucket is this code’s signature.

Check nothing has jammed the ejector arm — a cube that welded itself to the housing will do it.

Cycle the power for five minutes.

If the tray is still full a day later, the module is the repair. It comes out as an assembly.

Where this goes next

The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 419-0291](tel:+13054190291) and describe what the panel is doing before booking anything.

---

**[Read full article: Refrigerator error code It](https://lgmiami.support/error-codes/refrigerator-ice-maker-motor/)**