---
title: "Dryer: Blinking LEDs on a dryer with no display"
description: "Dryer blinking leds on a dryer with no display — dryer: Blinking LEDs on a dryer with no display: lG dryer — reported by blinking lights rather than by a"
url: "https://lgmiami.support/error-codes/dryer-blinking-lights/"
date_modified: "2026-09-05"
Appliance type: "Dryers"
---


# Dryer: Blinking LEDs on a dryer with no display

### What the appliance is actually reporting

As with the washers, some LG dryers have no numeric display and report by blinking their indicator lights instead, and LG publishes the mapping. The combinations mean specific things — the same conditions the numbered machines show as codes — and they are documented, which under the owner’s instruction of 2026-08-27 makes them codes rather than curiosities. Nothing about the diagnosis changes; only the way the machine tells you does.

### The other light combinations that mean this

dryer-led · blinking LED · flashing lights

LG publishes what the indicator lights mean on the washers and dryers that have no numeric display. They are grouped here by what they mean rather than split into near-identical pages, and every pattern the maker names is printed above.

### Where this appears, and why not to clear it

On the indicator lights, on a laundry machine with no numeric display. LG publishes what the patterns mean, and on those models the pattern is the entire diagnosis — it disappears the moment the power is cut. Write it down or photograph the panel before switching anything off, and count a full sequence rather than a single flash: the lights also blink to show cycle status, so treat it as an error only if the machine is misbehaving as well.

### What to do about it

- Watch a full sequence and count the lit lights before doing anything.
- Photograph the panel while it blinks.
- Clean the lint screen and check the duct first regardless — most dryer conditions start there.
- Quote the pattern when you call. It is what a technician works from.

### Where this goes next

The job this usually becomes is [diagnostic visit](/services/diagnostic-visit/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 419-0291](tel:+13054190291) and describe what the panel is doing before booking anything.

Blinking LEDs on a dryer with no display

What the lights are telling you

What the appliance is actually reporting

As with the washers, some LG dryers have no numeric display and report by blinking their indicator lights instead, and LG publishes the mapping. The combinations mean specific things — the same conditions the numbered machines show as codes — and they are documented, which under the owner’s instruction of 2026-08-27 makes them codes rather than curiosities. Nothing about the diagnosis changes; only the way the machine tells you does.

The other light combinations that mean this

dryer-led · blinking LED · flashing lights

LG publishes what the indicator lights mean on the washers and dryers that have no numeric display. They are grouped here by what they mean rather than split into near-identical pages, and every pattern the maker names is printed above.

Where this appears, and why not to clear it

On the indicator lights, on a laundry machine with no numeric display. LG publishes what the patterns mean, and on those models the pattern is the entire diagnosis — it disappears the moment the power is cut. Write it down or photograph the panel before switching anything off, and count a full sequence rather than a single flash: the lights also blink to show cycle status, so treat it as an error only if the machine is misbehaving as well.

What to do about it

Watch a full sequence and count the lit lights before doing anything.

Photograph the panel while it blinks.

Clean the lint screen and check the duct first regardless — most dryer conditions start there.

Quote the pattern when you call. It is what a technician works from.

Where this goes next

The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 419-0291](tel:+13054190291) and describe what the panel is doing before booking anything.

---

**[Read full article: Dryer: Blinking LEDs on a dryer with no display](https://lgmiami.support/error-codes/dryer-blinking-lights/)**