---
title: "Dishwasher error code F35"
description: "LG dishwasher error code F35: The second of the drying group. Where F31 is the air not moving, this is the heat not arriving — the element or the sensor…"
url: "https://lgmiami.support/error-codes/dishwasher-heat-dry-temperature/"
date_modified: "2026-09-05"
Appliance type: "Dishwashers"
---


# Dishwasher error code F35

### What F35 means on this make

The second of the drying group. Where F31 is the air not moving, this is the heat not arriving — the element or the sensor watching it. The result in the kitchen is identical, which is why the code is worth reading rather than guessing from the symptom, and why a machine that dries badly is not automatically a machine that needs a heater.

### The other ways LG prints this one

F35 · F 35

LG publishes a condition and then every string that can stand for it, and which one your machine shows depends on the panel it was built with — OE, E03 and E21 are one condition on a washer, and Er dS, F dS and r dS are one sensor on different evaporators. They are one page here, so whichever of them you searched for, this is the right page.

### Where this appears, and why not to clear it

On the appliance’s own display. LG reports errors two ways: machines with a digital display show a code, and the laundry machines without one blink their indicator lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power. On a refrigerator you can also force the last code back onto the display by holding Freezer Temperature and Express Frz together for three seconds — LG documents that, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.

### What to do about it

- Confirm the wash is unaffected, which it usually is.
- Top up the rinse aid; poor drying is often that and nothing else.
- Note whether plastics are wet and china is dry — that is normal drying, not a failure.
- Cycle the power, and book it if the code holds.

### Where this goes next

The job this usually becomes is [diagnostic visit](/services/diagnostic-visit/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 419-0291](tel:+13054190291) and describe what the panel is doing before booking anything.

Heat dry temperature

What this one means

What F35 means on this make

The second of the drying group. Where F31 is the air not moving, this is the heat not arriving — the element or the sensor watching it. The result in the kitchen is identical, which is why the code is worth reading rather than guessing from the symptom, and why a machine that dries badly is not automatically a machine that needs a heater.

The other ways LG prints this one

F35 · F 35

LG publishes a condition and then every string that can stand for it, and which one your machine shows depends on the panel it was built with — OE, E03 and E21 are one condition on a washer, and Er dS, F dS and r dS are one sensor on different evaporators. They are one page here, so whichever of them you searched for, this is the right page.

Where this appears, and why not to clear it

On the appliance’s own display. LG reports errors two ways: machines with a digital display show a code, and the laundry machines without one blink their indicator lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power. On a refrigerator you can also force the last code back onto the display by holding Freezer Temperature and Express Frz together for three seconds — LG documents that, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.

What to do about it

Confirm the wash is unaffected, which it usually is.

Top up the rinse aid; poor drying is often that and nothing else.

Note whether plastics are wet and china is dry — that is normal drying, not a failure.

Cycle the power, and book it if the code holds.

Where this goes next

The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 419-0291](tel:+13054190291) and describe what the panel is doing before booking anything.

---

**[Read full article: Dishwasher error code F35](https://lgmiami.support/error-codes/dishwasher-heat-dry-temperature/)**